Machine Sheds · Cambridge Pole Barns
Machine Shed Builders in Cambridge, MN
Cold storage for tractors, balers and more. Send us your equipment list.
Machine Sheds across Chisago, Isanti and Pine counties
Get a Free Machine Shed Quote
Tell us the size, what it's for and where the land is. A builder calls you back with a free quote.
- Free quotes
- No obligation
- Shells to finished buildings
- Site prep included
Fill out the form below for your free quote 👇
Machine Sheds
Machine Shed Builders for Cambridge, MN
Farms around Braham, Milaca and Mora run on equipment that costs real money and rusts if it sits out. A machine shed keeps the tractor, baler, brush hog and wagons dry, and a clear span interior lets you pull any of them out without moving the others. Cold storage is the simple choice: no heat, no insulation, just a strong frame, steel and doors.
Door size sets the whole building. Measure the tallest piece, mast raised or cab on, and leave room above and beside it. A sliding door on a track runs well in snow, a bi-fold lifts clear, and both come in generous sizes. Gravel floors suit most storage. A concrete pad inside the door is handy for washing down or working on a mower in March.
What's included
What goes into machine sheds
- 01
Door matched to the machines
Openings sized to your tallest and widest piece, with extra room for the next purchase.
- 02
Clear-span trusses
Roof trusses spanning the width so there are no posts to dodge in the middle.
- 03
Gravel or concrete floor
Compacted rock throughout, or a concrete apron where equipment gets washed or serviced.
- 04
Lean-to for hay
An open side shed for bales and wagons, built to handle drifted snow.
- 05
Wide approach
A graded drive and turning room so you can back in implements without ruts.
- 06
Lights and outlets
Good lighting and a few outlets for the charger, the grinder and the work light.
Building ideas
Machine Sheds: what they can look like
Example photos of the building type.
How it works
How a machine shed job works
- 1
List the equipment
Tractors, implements and hay set the door size and the span.
- 2
Plan the site
Choose a high, drained spot with a good approach, away from the well and wet ground.
- 3
Drawings and permit
Plans reflect frost depth and snow load, with setbacks checked, and farm exemptions applied where they exist.
- 4
Build
Posts, trusses, steel and doors go up, and the floor is finished.
Questions
Machine Sheds FAQs
How deep do the posts go for a farm building?
In Isanti and Chisago counties the frost depth is 42 inches. Further north, in Kanabec, Mille Lacs and Pine counties, it is 60 inches. Posts reach below that line, and wet ground may add a footing pad.
What does a machine shed cost?
Width, length and height set the base, and big doors add to it. Floor and site work come next. Cold storage with a gravel floor is the lowest-effort version of the building.
Does a farm shed need a permit?
Agricultural buildings on a working farm can be exempt from the State Building Code. County zoning, setbacks and any shoreland rules still apply, and the builder checks them.
Will the roof hold snow?
Trusses are engineered for the ground snow load at your address, and the pitch and overhang are chosen so snow slides clear of the doors.
Can I use it for livestock too?
A machine shed is built for equipment. If you want animals, ask for a horse barn or a separate shelter with ventilation designed for them.
Related buildings
You might also be planning
Post Frame Buildings
The strong, simple frame under barns, shops, storage and small business buildings.
More on post frame buildings
Pole Sheds & Storage Buildings
Storage for RVs, boats, pontoons, snowmobiles, fish houses and hay, enclosed or open.
More on pole sheds & storage buildings
Horse Barns
Stall barns, tack rooms, run-ins and riding arenas for small farms and horse property.
More on horse barns
Where we build
Machine Sheds in these towns
We build cold-storage machine sheds with big sliding doors in every town below.
Ready to price your machine shed?
Free quotes. Call or fill out the form.